- Mô tả
- Size Guide
- Thông tin bổ sung
- Đánh giá (0)
- Thông số kỹ thuật
- Tài liệu
- Vendor Info
- More Products
- Store Policies
The Automated Forklift MP10SH is based on the second generation of laser SLAM ground automatic forklift trucks. This automated forklift has a small shape and strong load capacity. The AF series core controller is equipped inside to achieve ±10mm high precision positioning; And with infrared sensors, 3D obstacle avoidance, safety edge contact and other sensors for safety protection, this automated forklift can ensure the safety of people and goods in the process of operation. It can flexibly complete the transport of goods in a narrow space and realize the intelligent logistics of the factory “handling magic”.
Descriptions of Automated Forklift MP10SH
- Customized laser height
The navigation lidar is installed on the top of the bracket. Also, the original location of the navigation lidar is replaced with an obstacle avoidance lidar.
- Accurate obstacle avoidance
3D obstacle camera makes a route to achieve perfect obstacle avoidance.
- More reliable anti-collision system
Increase the anti-collision bar at the bottom of the fuselage and support a variety of sensors for safety protection to ensure the safety of staff, goods and robots during operation.
- Pallet recognition
Pallet recognition+Accurate handling
- Automatic charging
Support automatic charging with no staff intervention.
Thông tin bổ sung
Smart Forklift Vận chuyển
|Kiểu điều hướng
Điều hướng tự nhiên | Laser SLAM 2D/3D
Specifications of Smart Forklift MP10SH
|There is no
|1. Navigation accuracy usually refers to the repeated accuracy of the robot’s navigation to the target site, when the environment scanned by the robot lidar is relatively stable (rate of change & lt 30%), the robot can navigate from a fixed direction to the target site with the desired repeatability.
When the robot runs along the virtual path, it will try to fit the path, but repeatability is not guaranteed.
In other words, the robot can guarantee the accuracy of arrival, but not the accuracy of navigation path fitting.
Fork positioning accuracy refers to the error range of a forklift truck when it is rising or descending to a specified height.
|2. The road surface is smooth and clean, without obvious ups and downs.
Slope 5% = arctan(0.05) ≈ 2.8°.
The robot cannot stop or turn at the ramp, step or gap, and can only pass quickly perpendicular to the ramp, step or gap.
|3. ESA TECH identification camera and algorithm authorization are required
|4. It needs to be used with ESA TECH system.
|5. Comply with ESA TECH stacking and de-stacking technical requirements.
- No ratings found yet!
There are no enquiries yet.