- Mô tả
- Size Guide
- Thông tin bổ sung
- Đánh giá (0)
- Thông số kỹ thuật
- Tài liệu
- Vendor Info
- More Products
- Store Policies
SRC-powered Laser SLAM Small Stacker Automatic Forklift SFL-CDD14, is equipped with a built-in SRC Series Controller developed by SEER. It can deploy easily without reflectors by adopting Laser SLAM navigation and slam simultaneous localization and mapping, pick up accurately by pallet identification sensor, work through narrow aisle with slim body and small gyration radius and ensure 3D safety protection by various sensors such as 3D obstacle avoidance laser and safety bumper. This self driving forklift is the preferred transfer robotic for goods moving, stacking and palletizing in the factory.
Descriptions of Smart Forklift SFL-CDD14
- Universal for narrow aisle
No reflector, easy to deploy with laser SLAM navigation
- Comprehensive protection
Obstacle avoidance laser+Bumper+Distance sensor+3D Camera – 360° protection
- High precision
Pallet recognition+Accurate handling
- Good applicability
Ramp, gap, elevator, transfer, stacker
- Flexible dispatching
Seamless access to dispatching system
Thông tin bổ sung
Smart Forklift Kho hàng
|Kiểu điều hướng||
Điều hướng tự nhiên | Laser SLAM 2D/3D
Specifications of Smart Forklift SFL-CDD14
|×||There is no|
|1. Navigation accuracy usually refers to the repeated accuracy of the robot’s navigation to the target site, when the environment scanned by the robot lidar is relatively stable (rate of change <
30%), the robot can navigate from a fixed direction to the target site with the desired repeatability.
When the robot runs along the virtual path, it will try to fit the path, but repeatability is not guaranteed.
In other words, the robot can guarantee the accuracy of arrival, but not the accuracy of navigation path fitting.
Fork positioning accuracy refers to the error range of a forklift truck when it is rising or descending to a specified height.
|2. The road surface is smooth and clean, without obvious ups and downs.
Slope 5% = arctan(0.05) ≈ 2.8°.
The robot cannot stop or turn at the ramp, step or gap, and can only pass quickly perpendicular to the ramp, step or gap.
|3. Seer identification camera and algorithm authorization are required|
|4. It needs to be used with SEER system.|
|5. Comply with SEER stacking and de-stacking technical requirements.|
- No ratings found yet!
There are no enquiries yet.